Aircraft Elevators Parts

End item NSN parts page 1 of 40
Part Number
NSN
NIIN
0-011 O-ring
001660975
0-1285 O-ring
005793158
0-1512 O-ring
001660980
0-483-020-02 PC049 Composition Fixed Resistor
001057764
0.375UNF Hexagon Self-locking Nut
009500039
00.520.0835 Duplex Ball Bearing
001588308
000-1232-2000 Lubrication Fitting
001720034
000-145741 Bearing Ball
001006151
000-8004-561 Composition Fixed Resistor
001107620
0000-305808 O-ring
001651960
00002249548 O-ring
001668422
0001-0006R O-ring
002920580
0001-0038-R O-ring
001660980
0001-0038R O-ring
001660980
0001.0038.R O-ring
001660980
000114EE O-ring
001661063
000145X0029 Lubrication Fitting
000481788
Page: 1 ...

Elevators, Aircraft

Picture of Aircraft Elevators

Elevators are flight control surfaces, usually at the rear of an aircraft, which control the aircraft's pitch, and therefore the angle of attack and the lift of the wing. The elevators are usually hinged to the tailplane or horizontal stabilizer. They may be the only pitch control surface present, sometimes located at front (early airplanes) or integrated into a rear "all-moving tailplane" also called a slab elevator or stabilator.

The horizontal stabilizer usually creates a downward force which balances the nose down moment created by the wing lift force, which typically applies at a point (the wing center of lift) situated aft of the airplane's center of gravity. The effects of drag and engine thrust may also result in pitch moments that need to be compensated with the horizontal stabilizer.

Both the horizontal stabilizer and the elevator contribute to pitch stability, but only the elevators provide pitch control. They do so by decreasing or increasing the downward force created by the stabilizer :

قارن الآن»
واضح | أخفى