رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Adapter, az actuator, rear
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.5500 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 0.4690 inches and 0.4700 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.3120 inches and 0.3130 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
0.6250 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
As-4525/spn-35c, antenna, azimuth
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
Between 0.0900 inches and 0.1000 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
3x 0.020 x 45 degrees chamfers on the base of the sleeve on the bottom; finish: chemical conversion coating per mil-c-5541, class 1a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-b211 assn standard single material response or qq-a-225/8 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
22c-3 solid, external flange one end, internal flange at both ends
