رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Automotive Axle Shaft
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
25.000 inches
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
The amount of first end taper per measurement scale.AMCP
Err Default:
Err default
MRC:
The amount of first end taper per measurement scale.AMCP
First End Taper:
0.500 inches per foot
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end tapered portion,and terminates at the circumference.AMCR
First End Taper Major Diameter:
2.000 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
0.188 inches
MRC:
A measurement between specified points of the keyway at the first end.AMDG
First End Keyway Depth:
0.188 inches
MRC:
A measurement of the longest dimension of the second end spline,in distinction from width.AMGA
Second End Spline Length:
2.500 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the second end spline,and terminates at the circumference.AMGB
Second End Spline Minor Diameter:
1.500 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the second end spline,and terminates at the circumference.AMGC
Second End Spline Major Diameter:
1.625 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Tapered
MRC:
A narrative description of the second end.AMQF
Second End Type:
Splined
MRC:
Designates the thread diameter and number of threads per inch of the first end.AQSQ
First End Thread Size:
1-1/4-12
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of specific diameters of the first end.ATKT
First End Thread Series:
Unf
MRC:
The number of second end spline(s) provided.BBCF
Second End Spline Quantity:
16
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Not included
MRC:
Indicates the type of second end spline provided.BNTM
Second End Spline Type:
Straight
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Not included
MRC:
The length of a straight line which passes through the center of the first end pin hole,and terminates at the circumference.BNYZ
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of the first end pin hole,and terminates at the circumference.BNYZ
First End Pin Hole Diameter:
0.141 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
