رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Threaded hole through first end drilled at a 15 degree angle; heat treat to rockwell c 36-40 per mil-h-6875; final protective finish solid film lube per mil-l-46010 type 2
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Threaded cross drilled (thru hole)
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and externally threaded
Second End Groove Width:
1.0330 inches
Second End Groove Diameter:
0.4310 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
10.570 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4925-01-261-1140
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.4970 inches
Second End Distance From End To Groove:
0.397 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.4970 inches
Second End External Thread Length:
0.397 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4130
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams6371 assn standard single material response
