رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
No adhesive specification given; temperature range: -65deg. To 160deg.F first article inspection is required of all vendors
TXT
وصف:
Electronic Shielding Gasket
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Emi hollow
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the inside circumference.ADVK
Cross Section Inside Diameter:
Between 0.178 inches and 0.198 inches
MRC:
The length of a straight line which passes through the center of a cross section,and terminates at the outside circumference.ADVL
Cross Section Outside Diameter:
Between 0.210 inches and 0.230 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Agm-130
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Nonseparable
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q and aluminum and adhesive
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541, class3 military specification 1st treatment response inner ring
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
51215-ve483-5002 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
