رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.185 inches and 0.195 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.780 inches and 2.800 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.320 inches and 1.340 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 2.240 inches and 2.260 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.260 inches and 0.280 inches
Bolt Hole Centerline To Nearest Edge Distance:
Between 0.130 inches and 0.150 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
An/alq-17 (v) 1/2 common
MRC:
The number of laminations provided.BRDX
Lamination Quantity:
21
MRC:
The distance between the opposite flat surfaces of the individual laminations.BRDY
Lamination Thickness:
0.002 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Laminated
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/square corners
