رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Ather are two holes threaded 10-32unf-2b. The first hole is located 1.25 in. From left end and 3.750 in. From first hole to second hole center. The holes are located from 2.25 in. From left side
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Plain
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
1.0000 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
10.5000 inches
Second Leg Width:
3.0000 inches
First Leg Hole Diameter:
0.2500 inches
Second Leg Hole Diameter:
0.2500 inches
Second Leg Distance Between Hole Centers Along Width:
2.0000 inches
Second Leg Distance From Edge To Hole Center Along Width:
0.5000 inches
Second Leg Distance From Edge To Hole Center Along Length:
0.2500 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.0625 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.0625 inches
First Leg Width:
3.0000 inches
First Leg Distance Between Hole Centers Along Width:
2.0000 inches
First Leg Distance From Edge To Hole Center Along Width:
0.5000 inches
First Leg Distance From Edge To Hole Center Along Length:
0.2500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm-a-240 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
