رقم الجزء
تجريد
صلاحيه
UOM
NIIN
وحدة القياس:
* special requirements. EA
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Radii ends
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Casehardened
MRC:
The included angle of the countersink,expressed in degrees.AATA
Countersink Angle In Deg:
45.0
MRC:
The distance from the centerline to the axis of the item.ABGG
Radius:
0.030 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.85910 inches and 0.85930 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.5750 inches and 0.5800 inches
MRC:
A measurement of the longest dimension of the body,in distinction from width.ADAQ
Body Length:
Between 2.7380 inches and 2.7530 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
58.0 rockwell c and 63.0 rockwell c
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Inside chamfer straight-thru bore
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, federal standard 66, aisi/sae 1016 or steel, federal standard 66, aisi/sae 1117 or steel, federal standard 66, aisi/sae 1019
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1016 or steel comp 1117 or steel comp 1019
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Fed standard 66 federal standard 1st material response or aisi 1016 assn standard single material response or sae 1016 assn standard single material response and federal standard 66 federal standard 2nd material response or aisi assn standard single material response or sae 1117 assn standard single material response and federal standard 66 federal standard 3rd material response or aisi 1019 assn standard single material response or sae 1019 assn standard single material response
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Engine, gasoline, nonaircraft
