رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
087-014557-001
معلومات الجزء
Ends tin plated iaw mil-p-81728, 0.0003 inch , finish no. M222 iaw mil-f-14072; operating temperature -55 to +105 degrees c
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rectangular
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.006 inches single conductor and 0.008 inches single conductor
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.310 inches and 0.390 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
Between 0.015 inches and 0.025 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Alq-135b
MRC:
Indicates the type of facility provided on the device for attaching to another item.AKRZ
Termination Type:
Stripped both ends single conductor
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the lead.AXBQ
Leadlength:
4.420 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.CWWG
Height:
0.245 inches single conductor and 0.255 inches single conductor
MRC:
The fabricated form of the conductor.CXCW
Conductor Form:
Braid, flat single conductor
MRC:
The geometric configuration of the conductor when viewed in cross-section.CXDM
Conductor Cross-sectional Shape:
Rectangular single conductor
MRC:
The maximum sustained voltage that can be safely applied to the item without risking failure or damage.CXFK
Voltage Rating:
300.0 ac rated working voltage single conductor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper core conductor single conductor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyimide 1st position primary insulation single conductor
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-46112, type 1 military specification 2nd material response 1st position primary insulation single conductor
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-c-502, soft temper federal specification 1st material response core conductor single conductor
