رقم الجزء 0N046995

Plate Insulator

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 10.24 and 13.824 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
0n046995
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
004834644

معلومات الجزء
0.460 in. Cutout beginning 2.152 in. From end; 0.210 in. Notch on end

NSN
رقم المخزون الوطني:
5970-00-483-4644 5970004834644
TXT
وصف:
Plate Insulator
INC
INC
رمز اسم العنصر:
18296
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.775 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.014 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.005 inches
MRC:
None.ABRC
First Hole Diameter:
0.096 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Cja
MRC:
None.AHLF
Second Leg Width:
0.340 inches
MRC:
None.AHQN
First Leg Width:
0.360 inches
MRC:
None.CQSH
First Hole Spacing:
0.760 inches
MRC:
None.CRKY
Second Hole Spacing:
0.270 inches
MRC:
None.CRTB
Third Hole Spacing:
3.040 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic sheet, no. 621-43, sun electric corp
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flat, "l" shaped
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
98230-0n046995 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

{lang[cimilar]} Plate Insulators

« Electrical Insulators and Insulating Materials {lang[catalog]}
قارن الآن»
واضح | أخفى