رقم الجزء 0N149634-6

Extension Drawer Slide Section

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
0n149634-6
تجريد:
Yes - DEMIL/MLI
صلاحيه:
وحدة القياس:
NIIN:
004058838
NSN
رقم المخزون الوطني:
5340-00-405-8838 5340004058838
TXT
وصف:
Extension Drawer Slide Section
INC
INC
رمز اسم العنصر:
28415
INC
COM
امتثال:
* ITAR Controlled
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
3.500 inches
MRC:
The means of attaching the item.AXGY
Mounting Method:
Unthreaded hole
MRC:
A measurement of the longest dimension of a section,in distinction from width.BWGL
Section Length:
31.260 inches
MRC:
An indication of the side for which the item is designed.BWJF
Side For Which Designed:
Left hand
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.CWWG
Height:
1.380 inches
MRC:
None.CXXC
Err Default:
Err default
MRC:
None.CXXC
Distance From End To Pivot Point:
15.630 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-200/11, t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
2 - piece pivoting
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
05236-150281al drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

{lang[cimilar]} Extension Drawer Slide Sections

« Commercial Hardware {lang[catalog]}
قارن الآن»
واضح | أخفى