رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The specific commercial rating which classes the item as to what degree the item will withstand environmental elements and/or hazardous locations.ABFE
Hazardous Locations/environmental Protection:
U.L. Type d
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
82.000 inches
MRC:
A measurement of the longest dimension of a fork,in distinction from width.AGBS
Fork Length:
48.000 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width:
14.000 inches
Overall Height With Forks In Lowest Position:
125.000 inches
Overall Height With Forks In Highest Position:
177.000 inches
MRC:
The radius of a circle formed by the outermost part of a vehicle while executing the shortest possible turn.AGCQ
Vehicular Turn Radius:
180.000 inches
MRC:
The minimum distance required between pallets,platforms,and the like /storage aisle width/,to perform right angle stacking and/or tiering functions.AGCR
Storage Aisle Minimum Width:
251.000 inches
MRC:
A measurement of the distance from the front face of the forks to a specified point at which the rated load capacity is determined.AGCT
Fork Load Center Distance:
24.000 inches
MRC:
The distance measured from the ground/floor surface to the load carrying surface in the lowest position.AGDE
Minimum Load Carrying Surface Height:
24.000 inches
MRC:
Indicates the type of steering mechanism provided on the item.AGDS
Steering Type:
Crabbing and cramping
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Diesel engine
