رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
1-114860issue1
MRC:
The number of threads per inch on the mounting.AAMQ
Mounting Threads Per Inch:
32
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.688 inches
MRC:
The length of a straight line which passes through the center of a bushing,and terminates at the circumference.ABKH
Bushing Diameter:
0.375 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
1.875 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.516 inches
MRC:
A measurement of the longest dimension of a bushing,in distinction from width.ABXD
Bushing Length:
0.250 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Between 0.312 inches and 1.875 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Bushing
MRC:
The number of indexed positions to which the switch actuator may be moved.AFTM
Switch Position Quantity:
10
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Type an/psm-4a
MRC:
A measurement taken at right angles to the length of the shaft, in distinction from thickness.AKJH
Shaft Width:
Between 0.156 inches and 0.219 inches
MRC:
An indication of whether or not a locking device is included.AMDA
Locking Device:
Not included
MRC:
The angular rotation that the item moves between positions,expressed in degrees.APDM
Positioning Increments In Deg:
30.0
MRC:
An indication of whether or not the stop is adjustable.APDN
Stop Adjustability:
Nonadjustable
MRC:
The geometric configuration of the shaft end,when viewed axially,and its location.APDQ
Shaft Cross-sectional Shape And Location:
Round parallel flatted front end
MRC:
A measurement,such as length,width,diameter,and the like.APDR
Size:
0.250 in. Diameter front end
MRC:
The distance from the end of the shaft to the mounting surface.APDS
Distance From Shaft End To Mounting Surface:
0.938 inches
