رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Hole drilled in prebent key 0.046 in. Min 0.048 in. Maximum diameter on center line 0.070 in. Min 0.090 in. Maximum from end
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.179 inches and 0.199 inches
External Prebent Key Length:
Between 0.190 inches and 0.210 inches
External Prebent Key Width:
Between 0.240 inches and 0.260 inches
Distance From Centerline To Inside Of Prebent Key:
Between 0.620 inches and 0.640 inches
Overall Distance Including Keys:
Between 1.330 inches and 1.350 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.810 inches and 0.830 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.040 inches and 0.060 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
76.0 rockwell superficial 30-t
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5510 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Key
