رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Round
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
4.000 inches first end
MRC:
The minimum inside bending radius formed without stressing or deformation of a flexible item.ACKH
Minimum Inside Bending Radius:
6.000 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.AGQM
Endlength:
1.500 inches both ends
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Round both ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Preformed both ends
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Ozone resistant
MRC:
The length of a straight line which passes through the center of the end,and terminates at the inside circumference.CPYG
End Inside Diameter:
4.000 inches both ends
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
10.0 pounds per square inch
MRC:
The means used and the measurement of the longest dimension of an item.CRXX
Measuring Method And Length:
66.000 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 2nd ply and rubber chloroprene class cr 2nd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass 3rd ply and rubber chloroprene class cr 3rd ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberglass reinforcing cord and rubber chloroprene class cr reinforcing cord
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber 1st ply
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel reinforcing wire
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Helically wound continous wire supported
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-h-52079 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
