رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Weapon system essential; includes pipe/tube retaininbg ring with groove dimensions; rotatable bored flange
TXT
وصف:
Swivel Retaining Pipe Flange
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
0.209 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
1.560 inches
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
2.312 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
2.730 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
1.560 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.500 inches
MRC:
A measurement between specified points on the socket,in distinction from height.ABXN
Socket Depth:
0.209 inches
MRC:
The industrial designation or term used to define the nominal diameter of pipe for which the item is designed.ACSU
Pipe Size For Which Designed:
1.500 inches
MRC:
The length of a straight line which passes through the center of the tube for which designed,and terminates at the outside circumference.ACSV
Tube Outside Diameter For Which Designed:
1.375 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
6
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ship
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange section.AJEM
Flange Section Style:
Plain face, socket neck
MRC:
A geometric configuration of the groove when viewed in cross section.AJEX
Groove Cross-sectional Shape:
Rectangular
MRC:
The pitch diameter of the groove.AJEY
Groove Pitch Diameter:
1.560 inches
MRC:
The condition of the face seating surface of an item which contacts another surface.AKWE
Face Seating Surface Condition:
Machined
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
5.0 pounds per square inch gas
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
140.0 degrees fahrenheit gas
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Test iaw astm g63, astm g72, and astm g94
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round, one bolt hole circle
