رقم الجزء 10029111-1

Spur Gear

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 604.52 and 816.102 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
10029111-1
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
013330710

معلومات الجزء
Internal spline tooth cutting & inspection data, ansi 892.1a-1976, 32/64 pitch, pressure angle 30 deg, 0.4059 in. Base dia, 0.054 in. Measuring pin dia, 0.392 in. Measurement between two pins, 0.0491 in. Min effective space width, 0.052 in. Maximum actual space width, 0.001 in. Maximum total index variation, 0.0004 in. Maximum lead variation

NSN
رقم المخزون الوطني:
3020-01-333-0710 3020013330710
TXT
وصف:
Spur Gear
INC
INC
رمز اسم العنصر:
05466
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Webbed, with lightening holes
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
15 both ends
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
3.6000 inches
MRC:
The number of teeth included on the item.AJLA
Teeth Quantity:
72
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style:
Involute spline both ends
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.4688 inches both ends
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
3.686 inches
MRC:
The measurement of the pressure angle on the item.CWPP
Pressure Angle:
20.0000 degrees
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.316 inches first end
MRC:
The nominal distance between the body face and the protruding hub end.CWQL
Distance Between Body Face And Protruding Hub End:
0.060 inches second end
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.CWRM
Face Width:
0.310 inches
MRC:
The nominal length of a straight line which passes through the center of a bore,and terminates at the circumference.CWRS
Bore Diameter:
0.537 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024 body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-225/6 federal specification single material response body
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Lubricant dry film body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171 military standard single treatment response body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flush hub

{lang[cimilar]} Spur Gears

« Gears, Pulleys, Sprockets and Transmission Chain {lang[catalog]}
قارن الآن»
واضح | أخفى