رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Furnished with three nuts, self-locking, plate and six rivets
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Machined
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 1.234 inches and 1.266 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.828 inches and 0.859 inches
First Leg Hole Diameter:
Between 0.276 inches and 0.286 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.086 inches and 0.094 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.086 inches and 0.094 inches
First Leg End Width:
Between 5.901 inches and 5.911 inches
First Leg Distance Between First And Second Hole Centers Along Width:
Between 2.245 inches and 2.255 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
Between 2.245 inches and 2.255 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.797 inches and 0.828 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.422 inches and 0.453 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Angle
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/8, h32 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
