رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Element id is only 0.110 in. Deep and not a through hole
TXT
وصف:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the smallest end of a tapered hole,and terminates at the circumference.AAZL
Tapered Hole Minor Diameter:
0.125 inches
MRC:
The length of a straight line which passes through the center of the largest end of a tapered hole,and terminates at the circumference.ADMT
Tapered Hole Major Diameter:
0.156 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
50.0 absolute and 25.0
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Inside out
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
3.0 pounds per square inch
MRC:
The length of a straight line which passes through the center of the smallest diameter of an item,and terminates at the outside circumference.AGWL
Smallest Outside Diameter:
0.224 inches
MRC:
The length of a straight line which passes through the center of the largest diameter of an item,and terminates at the outside circumference.AGWM
Largest Outside Diameter:
0.298 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Nonreusable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
0.195 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Sintered single filtering media response
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Gas
