رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
0.187 in. Min. 0.192 in. Max. Dia. Hole perpendicular on shank end
TXT
وصف:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
L shape
MRC:
A measurement of the longest dimension of a head,in distinction from width.AASV
Head Length:
2.905 inches
Tee Bolt Cylindrical Head Diameter:
0.375 inches
Under Head Length:
5.993 inches
First Step Diameter:
0.940 inches
First Step Length:
Between 1.940 inches and 2.060 inches
Second Step Diameter:
Between 0.7483 inches and 0.7490 inches
Second Step Length:
4.680 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
First Hole Diameter:
Between 0.187 inches and 0.192 inches
Distance From Centerline Of Hole To End Of Pin:
6.180 inches
First End Taper Length:
0.560 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
35.0 rockwell c and 39.0 rockwell c
First End Taper Angle:
20.0 degrees
First End Tip Radius:
0.060 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches large shank
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1010 head or steel comp 1012 head or steel comp 1015 head or steel comp 1016 head or steel comp 1017 head or steel comp 1018 head or steel comp 1019 head or steel comp 1020 head
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 3310 shank
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 3310 shoulder
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a575 assn standard all material responses head or astm a108 assn standard all material responses head
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-7393 military specification single material response shank
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-7393 military specification single material response shoulder
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
