رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Ysilicon rubber sponge, 0.25 in thk, measuring 1.360 in to 1.400 in wide by 1.420 to 1.460 in long fastened to inner cover. One corner of cover rounded 0.06 min. To 0.08 max.X 44 deg. Min. To 46 deg. Max. Inner face to be free of paint
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.141 inches and 0.150 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 5.680 inches and 5.700 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 4.210 inches and 4.220 inches
Hole Quantity Along Length:
4
Hole Quantity Along Width:
10
Distance Between Holes Along Length:
1.283 inches
Distance Between Holes Along Width:
1.333 inches
Distance From First Hole Centerline To End Along Length:
1.463 inches
Distance From First Hole Centerline To End Along Width:
1.513 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.064 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Matt
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 t6 temper federal specification single material response
