رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
First end three additional unthd cross drilled holes 90 degrees angles btwn holes; first end internal bore 0.625 in. Nom dia, 2.065 in. Nom dp; second end six internal splines 0.566 in. Dia, 0.375 in. Nom spline lg
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Unthreaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Cross drilled and circular grooved
Second End Groove Width:
Between 0.0460 inches and 0.0490 inches
Second End Groove Diameter:
Between 0.8320 inches and 0.8380 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.430 inches and 2.450 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.8715 inches and 0.8720 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
Between 0.1420 inches and 0.1440 inches
First End Distance From Hole Center To End:
0.815 inches
MRC:
A measurement between specified points of the hole at the first end,in distinction from height.AMEB
First End Hole Depth:
Between 0.237 inches and 0.256 inches
Second End Distance From End To Groove:
Between 0.042 inches and 0.052 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.8715 inches and 0.8720 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
0.1590 inches
Second End Distance From Hole Center To End:
Between 0.190 inches and 0.198 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
Between 0.061 inches and 0.080 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1045 or steel comp 1145
