رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Integral hub included
TXT
وصف:
Nonvehicular Clutch Disk
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
8.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.378 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.125 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.175 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
27
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
2.2500 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Dry
MRC:
Indicates the location of the item to which a specific material is applicable.AQQF
Material Location:
Both sides
MRC:
The physical configuration of the item.ARJD
Design Form:
Solid
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
20.0
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute
MRC:
Indicates the type of disk.BPLM
Disk Type:
Plain
MRC:
Indicates the type of asbestos composition provided.BSPF
Asbestos Composition Type:
Molded
MRC:
The length of a straight line which passes through the center of the material,and terminates at the outside circumference.BSPG
Material Outside Diameter:
8.750 inches
MRC:
The length of a straight line which passes through the center of the material,and terminates at the inside circumference.BSPH
Material Inside Diameter:
6.000 inches
MRC:
The means by which the facing is attached.BSPL
Facing Attachment Method:
Riveted
MRC:
The distance from the flywheel face to the rear of the hub.BSPT
Distance From Flywheel Face To Rear Of Hub:
0.125 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Friction material facing
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.CYBJ
Disk Material:
Steel
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Integral hub included; asbestos composition: molded
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy
