رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
O/a largest diameter has chamfer depth of 0.005 in. And 45 degrees angle
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
External threaded
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Bearing seat
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
0.875 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.1080 inches and 0.1100 inches
First End External Thread Length:
Between 0.240 inches and 0.260 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.0900 inches and 0.0960 inches
Second End Bearing Seat Length:
0.125 inches
MRC:
The length of a straight line which passes through the center of the second end bearing seat,and terminates at the circumference.AMHL
Second End Bearing Seat Diameter:
Between 0.1540 inches and 0.1550 inches
MRC:
The measured distance of the second end from the bearing seat to the end.AMHM
Second End Distance From Bearing Seat To End:
0.050 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
2
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 0.108 inches and 0.110 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763, class 416, cond a federal specification single material response
