رقم الجزء
تجريد
صلاحيه
UOM
NIIN
وحدة القياس:
* special requirements. EA
معلومات الجزء
Low pressure, w/o anti-backflow device
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Threaded hole top side
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
4.570 inches
MRC:
A measurement from the bottom to the top of the body,in distinction from depth.ADAU
Body Height:
9.250 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
12.0 absolute
MRC:
The difference in opposing pressure which an item is capable of withstanding without evidence of deformation or other damage.ADNQ
Differential Pressure:
25.0 pounds per square inch
MRC:
The distance between the centerline of the mounting holes.AFQM
Distance Between Mounting Hole Centers:
2.500 inches and 2.502 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Reusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
Between -45.0 degrees fahrenheit and 275.0 degrees fahrenheit
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Air bleed valve and by-pass valve and differential pressure indicator and thermal lockout
MRC:
The number of filtering elements provided.CCZM
Filtering Element Quantity:
1
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale applied to a mounting facility diameter.CDTD
Mounting Facility Thread Series Designator:
Unc
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
1000.0 pounds per square inch
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Pleated single filtering media response
MRC:
Indicates the type of connection on the first intake.CRXZ
First Intake Connection Type:
Threaded internal tube back
MRC:
A designation that is used for the purpose of general identification of the mounting facility thread.CSJC
Mounting Facility Thread Size:
0.312 inches
MRC:
Indicates the first discharge connection relationship to an intake connection.CSJR
First Discharge Connection Relationship To Intake Connection:
Identical to first intake connection
MRC:
A designation distinguishing one group of thread diameter-pitch combination from another by the number of threads per measurement scale for a specific diameter.CTDY
First Intake Thread Series Designator:
Un
MRC:
A designation that is used for the purpose of general identification of the thread.CTGK
First Intake Thread Size:
1.0625 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CWAR
First Intake Thready Qty Per Inch (tpi):
16
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.CWNZ
First Intake Thread Class:
3b
MRC:
The direction of the thread when viewed axially.a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.CXPF
First Intake Thread Direction:
Right-hand
MRC:
The filtering system for which the item is designed to be used.CXZX
Filtering System For Which Designed:
Full flow
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiber synthetic filtering medium and resin synthetic filtering medium
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Iron cast body
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic seal
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel sediment bowl or stainless steel sediment bowl
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil, hydrocarbon
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
High pressure threaded body
