رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Groove adjacent to shoulder thread, 0.047 in. W, 0.047 in. Deep.
TXT
وصف:
Optical Element Retainer
MRC:
The length of the enlarged portion of the shank on the item,in distinction from width or diameter.AATX
Shoulder Length:
Between 0.313 inches and 0.344 inches
MRC:
The length of a straight line which passes through the center of the smallest end of a tapered hole,and terminates at the circumference.AAZL
Tapered Hole Minor Diameter:
Between 1.000 inches and 1.005 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 0.060 inches and 0.070 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.422 inches and 0.438 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
Between 1.328 inches and 1.344 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
2
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
Between 0.060 inches and 0.070 inches
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Slotted
MRC:
The angular spacing between drive facilities,expressed in degrees.BMTN
Drive Facility Angular Spacing In Deg:
180.0
MRC:
An indication of whether or not an internal annular serration(s) is provided.BMTS
Internal Annular Serration:
Not provided
MRC:
An indication of whether or not a setscrew notch is provided.BMTT
Setscrew Notch:
Not provided
Shoulder Thread Size:
1.188 in.-32uns-2a
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Plastic, mil-m-14, type mfe
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic phenolic and silica
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-m-14, type mfe military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Periscope, tank m32, m32c, m35, m36
