رقم الجزء 10553932

Straight Shaft

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 277.68 and 374.868 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
10553932
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
012108179

معلومات الجزء
Finish is cleaning, passivation, and pretreatment coating. Clean and passivate, qq-p-35. Apply finish, pretreatment coating, tt-c-490, type 3 (wash primer).Surfaces marked "x" finish is tt-p-636 or tt-p-664.Topcoat is tt-e-489.Bake primer and topcoat. Color gray no 16187 of fed-std-595

NSN
رقم المخزون الوطني:
3040-01-210-8179 3040012108179
TXT
وصف:
Straight Shaft
INC
INC
رمز اسم العنصر:
22109
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved
MRC:
None.AAHG
First End Groove Width:
Between 0.1410 inches and 0.1510 inches
MRC:
None.AAHH
First End Groove Diameter:
Between 0.4450 inches and 0.4470 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.650 inches and 1.660 inches
MRC:
None.AMCY
First End Distance From End To Groove:
0.344 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 0.6242 inches and 0.6247 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.00 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 303 or steel comp 303se
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-764, cond a federal specification single material response

{lang[cimilar]} Straight Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
قارن الآن»
واضح | أخفى