رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Electronic Shielding Gasket
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Mesh and composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.160 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.530 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-31.0 degrees celsius and 100.0 degrees celsius
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.750 inches
MRC:
The smallest measurement taken at right angles to the length of an item,in distinction from thickness.ABNH
Minor Width:
0.120 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.120 inches
Outside Corner Radius:
0.190 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
1.750 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
5.530 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
0.650 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
1.150 inches
Outside Edge To Bolt Hole Center Distance Along Width:
0.200 inches
Outside Edge To Bolt Hole Center Distance Along Length:
0.200 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
0.060 inches
MRC:
A minor measurement from the bottom to the top of an object,in distinction from depth.ADWK
Minor Height:
0.060 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
18
MRC:
Indicates the location(s) at which the environmental protection material is joined to the electromagnetic interference/radio frequency interference (emi/rfi) material.CTNJ
Environmental Protection Material Location:
Around rf shielding gasket outer perimeter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 400 emi/rfi conductor
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr environmental seal
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-6130, type 2, grade a, condition medium military specification single material response environmental seal
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a federal specification single material response emi/rfi conductor or ams 4730 assn standard single material response emi/rfi conductor
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
