رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 1.920 inches and 1.980 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.650 inches and 0.710 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft eng j79, j85, t58, t64
Second Leg Width:
Between 1.248 inches and 1.252 inches
Second Leg Corner Radius:
Between 0.240 inches and 0.260 inches
First Leg Slot Length:
Between 0.310 inches and 0.330 inches
First Leg Slot Width:
Between 0.200 inches and 0.220 inches
Second Leg Hole Diameter:
0.343 inches
Second Leg Distance Between Hole Centers Along Width:
1.250 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.240 inches and 0.260 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.410 inches and 0.450 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.057 inches and 0.069 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.057 inches and 0.069 inches
First Leg Width:
Between 1.248 inches and 1.252 inches
First Leg End Width:
Between 0.350 inches and 0.374 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.230 inches and 0.270 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 1.680 inches and 1.720 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Angle
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One slot
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Corner radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
Two holes
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 321
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
