رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Heatsink, a/d discrete i/o
TXT
وصف:
Electrical-electronic Heat Sink
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Rectangular
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.300 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.135 inches
MRC:
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.AEBV
Unthreaded Mounting Hole Diameter:
0.118 inches all mounting facilities
MRC:
The style designation indicating the configuration that most nearly corresponds to the pattern of the facility by which the device can be mounted.CZGX
Accommodated Device Mounting Hole Pattern Style:
Six hole - 1.300 inch
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Distance between center hole along length is 8.050 inches; distance between center hole along width is 1.715 inches; has 2 additional mounting holes with diameter 0.096 inches centered 7.4 inches apart at a point centered 0.125 inches from bottom
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response or qq-a-225/8 federal specification single material response or qq-a-204/8 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-a-8625, type iii class 2, dyed black and sealed military specification single treatment response
