رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Portable; solid state; operating temp 0-55 degrees c; 2 vertical channels producing 1 trace each channel equals two traces; freq range dc to 50 mhz; 5 mv per cm sensitivity; 7 ns rise time
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
21.219 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
11.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
8.250 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
48.0 hertz and 400.0 hertz
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
Type10000a x 10 passive attenuator probes 3.5 ft lg 2, instruction manual 1, power cord 1 and 3-2 adapter 1
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
115.0 volts and 230.0 volts
MRC:
The number of beams provided on the item.ATES
Beam Quantity:
1
MRC:
The means of attaching the item.AXGY
Mounting Method:
Carrying case
MRC:
The acceptable limits of deviation from the designed standard output value of the item,expressed in percent.BDJD
Accuracy Range In Percent:
-1.0/+1.0
MRC:
The acceptable limits of deviation from the designed standard output value of the item,expressed in percent.BDJD
Accuracy Range In Percent:
-1.0 to 1.0
MRC:
Designates the relative or proportionate dimensions of the screen.BGQK
Screen Size:
8 by 10 centimeters
MRC:
An indication of whether or not sweep circuits are included.BGQL
Sweep Circuits:
Included
MRC:
An indication of whether or not a generator driven feature is included.BGQM
Generator Driven Feature:
Included
MRC:
Indicates the type of sweep circuits provided.BGQN
Sweep Circuit Type:
Horizontal and vertical
MRC:
The range of complete cyclic changes,per unit of time,for which the sweep is rated.BGQP
Sweep Frequency Range:
+0.0/+4.0 hertz and +0.0/+60.0 megahertz
MRC:
The range of complete cyclic changes,per unit of time,for which the sweep is rated.BGQP
Sweep Frequency Range:
+0.0 to 4.0 hertz and +0.0/+60.0 megahertz
MRC:
The length of time consumed by a single trigger sweep.BGQQ
Single Trigger Sweep Duration:
Between 0.1 microseconds and 1.0 microseconds
MRC:
An indication of whether or not provisions for rating the deflection sensitivity through the amplifier are provided.BHDD
Amplifier Deflection Sensitivity Provision:
Not provided
MRC:
An indication of whether or not an input intensity modulation feature is provided.BHDH
Input Intensity Modulation Feature:
Not provided
MRC:
An indication of the shape of the amplitude calibrating voltage waveform.BHDZ
Amplitude Calibrating Voltage Waveform:
Square wave
MRC:
The peak to peak value for which the item is calibrated.BHFB
Calibrating Peak To Peak Amplitude:
Between 1.0 volts and 3.0 volts
MRC:
An indication of whether or not camera recording device accommodations are provided.BHFT
Camera Recording Device Accommodation:
Not provided
MRC:
The number of alternating current phases.FAAZ
Phase:
Single or two
MRC:
Literature and references available for information pertaining to the item.RDAL
Reference Data And Literature:
To 33a1-13-458-1
