رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Air Conditioning Filter Element
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 3.660 inches and 3.720 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
5.0
MRC:
The measured rate of air flow at which the filter capacity is established.ADNS
Face Velocity:
500.0 feet per minute
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.470 inches and 0.530 inches
MRC:
Indicates the design type of the item.APGF
Design Type:
Reusable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
Between 15.660 inches and 15.720 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Crimped 1st filtering media response
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Mesh 2nd filtering media response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy filtering medium
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Rr-w-365, type 7 federal specification single material response filtering medium
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular (incl square)
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
18876-10688472 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
