رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.882 inches and 0.885 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.745 inches and 0.755 inches
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the outside circumference.AHMG
Large End Outside Diameter:
Between 1.412 inches and 1.418 inches
MRC:
A measurement taken at right angles to the length of the split,in distinction from thickness.BXBS
Split Width:
0.090 inches
MRC:
A measurement of the longest dimension of the tapered portion,in distinction from width.BXBT
Tapered Portion Length:
0.755 inches
MRC:
The included angle of the taper.BXBW
Taper Included Angle:
32 degrees, minus 15 minutes, plus 45 minutes
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1015 or steel comp 1025
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-631, comp 1015, 1025-canceled federal specification 1st material response or qq-s-634, comp 1015, 1025-canceled federal specification 2nd material response
