رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Engine Poppet Valve
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.1150 inches and 0.1250 inches
MRC:
The measurement of the chamfer angle,expressed in degrees.AATE
Chamfer Angle In Deg:
45.0
MRC:
The length of a straight line which passes through the center of the groove,and terminates at the circumference.AAVZ
Groove Diameter:
Between 0.3590 inches and 0.3650 inches
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.0300 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
Between 0.1320 inches and 0.1420 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.7510 inches and 1.7610 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
45.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the stem.ALYX
Stem Style:
Grooved
MRC:
An indication of whether or not a groove for relief of carbon accumulation is included.ALYZ
Carbon Relief Groove:
Not included
Neck Radius:
0.7500 inches
MRC:
A measurement of the longest dimension of a stem,in distinction from width.ALZD
Stem Length:
Between 6.0700 inches and 6.0760 inches
Stem Diameter:
Between 0.4344 inches and 0.4352 inches
Distance From Groove To Stem End:
0.5150 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, vms-201-21-4n fscm 59875 trw mechanical productsdiv for head and stem
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, vms-49 fscm 59875 trw mechanical products div fortip
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
32.0 rockwell c head err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
32.0 rockwell c stem err-100
MRC:
A numeric value,used in conjunction with a hardness rating scale,designating the metallic hardness rating and its location.ASXJ
Metallic Hardness Rating And Location:
67.0 shore scleroscope tip err-100
