رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Second leg contains 5 holes 0.375in. Diameter located along the width; cent er hole spaced 16.719 ins from edge, 2holes spaced 7.625 ins from center, 2 holes spaced 14.781 ins from center; 1notch 1.250 ins r located along the edge 5.750 ins to left of center, 2 notches 1.938 ins r located along the edge4.125 ins and 11.125 ins to the right of center; each end notched 0.375 in. R at centerline of bend
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
2.500 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
3.000 inches
Second Leg Width:
33.375 inches
First Leg Hole Diameter:
0.375 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.132 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.132 inches
First Leg Width:
33.375 inches
First Leg Distance Between First And Second Hole Centers Along Width:
13.375 inches
First Leg Distance Between Second And Third Hole Centers Along Width:
13.375 inches
First Leg Distance From Edge To Hole Center Along Width:
3.312 inches
First Leg Distance From Edge To Hole Center Along Length:
1.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Three holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-698 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
