رقم الجزء 10956454

Shouldered Shaft

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards
رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
10956454
تجريد:
Yes - DEMIL/MLI
صلاحيه:
وحدة القياس:
NIIN:
009092455

معلومات الجزء
Nickel-coated; hole 0.375 lg x 0.250 w on 1st, 2nd, and 3rd steps; 1st end boed 1.000 diameter x 2.280 deep

NSN
رقم المخزون الوطني:
3040-00-909-2455 3040009092455
TXT
وصف:
Shouldered Shaft
INC
INC
رمز اسم العنصر:
22914
INC
COM
امتثال:
* ITAR Controlled
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Unthreaded cross drilled
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two flat keyways
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.180 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
M110 howitzer family
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.5000 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the first end,and terminates at the circumference.AMDX
First End Hole Diameter:
0.3750 inches
MRC:
None.AMDZ
First End Distance From Hole Center To End:
0.250 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
0.6030 inches
MRC:
None.AMFS
Second End External Keyway Length:
0.186 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
0.093 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
1.1230 inches
MRC:
None.AMHY
Second End Angle Between Keyways:
180.0 degrees
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.625 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140 or steel comp 8740
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-624 federal specification all material responses
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Mount, gun, 175 mm

{lang[cimilar]} Shouldered Shafts

« Miscellaneous Power Transmission Equipment {lang[catalog]}
قارن الآن»
واضح | أخفى