رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.462 inches and 0.464 inches
MRC:
A measurement of the longest dimension of the tapered portion of an item,in distinction from width.ABND
Taper Length:
Between 0.368 inches and 0.396 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
Between 2.703 inches and 2.713 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
Between 2.973 inches and 2.983 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 3.089 inches and 3.090 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 2.490 inches and 2.510 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJSG
Seat Angle In Deg:
45.000
MRC:
Indicates the type of seal accommodation included in or on the item.AJSH
Seal Accommodation Type:
Grooved
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
90.0 rockwell b body and 105.0 rockwell b body
MRC:
The physical configuration of the surface of the seat.CQKM
Seating Surface Shape:
Angular
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Adar
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel body
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5700 assn standard single material response body
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Aircraft eng r2000
