رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
0.718 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.500 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.000 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 0.990 inches and 1.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.497 inches and 1.499 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.406 inches and 0.421 inches
MRC:
A measurement from the bottom of the mounting hole to the surface of the item.ACJD
Mounting Hole Depth:
1.000 inches
MRC:
A measurement of the longest dimension of the beveled edge of the key,in distinction from width.ACJF
Key Chamfer Length:
Between 0.062 inches and 0.077 inches
MRC:
The minimum load,applied perpendicularly to the longitudinal axis of an item,at which point the item will fracture when subjected to the standard shear test method.CQSX
Shear Strength:
0000 single pounds per square inch
MRC:
The distance from the center of the mounting hole to the end of the item.CRYW
Distance From Mounting Hole Center To End:
0.438 inches and 0.438 inches
MRC:
The physical configuration of the starting edge of the item.CSPJ
Starting Edge Shape:
Chamfered
MRC:
The included angle of the beveled edge of the key.CSXB
Key Chamfer Angle:
45.0 degrees
MRC:
Indicates the type and number of mounting holes provided on the item.CTQY
Mounting Hole Type And Quantity:
2 unthreaded-counterbored
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain
