رقم الجزء
تجريد
صلاحيه
UOM
NIIN
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
57.3 inch-pounds
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
Between 0.351 inches and 0.353 inches
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
Between 0.406 inches and 0.423 inches
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Pad
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.276 inches and 0.291 inches
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
4
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
0.563-18 and 0.563-18 and 0.375-24
MRC:
The speed of the drive shaft required to produce the rated capacity of an item,expressed in revolutions per minute.AEQC
Operating Speed At Rated Capacity In Rpm:
6960.0
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
0.375 inches
MRC:
Indicates the type of drive shaft by the physical configuration,condition,and the like of the shaft end.AJAB
Drive Shaft Type:
Splined, involute internal
MRC:
The element,compound,or mixture of which the housing is fabricated.AJLF
Housing Material:
Steel
MRC:
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.AJYP
Screw Thread Series Designator:
Un
MRC:
The direction of rotation of a rotating shaft as viewed from the drive end.AKCT
Shaft Rotation Direction:
Clockwise
MRC:
Indicates the location of the thread on the item.APJC
Thread Location:
Internal
MRC:
A measurement of the spline pitch of the item.ASAP
Spline Pitch:
32/64
MRC:
The number of connections furnished.ASMM
Connection Quantity:
1 and 1 and 1
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Inlet and outlet and drain
MRC:
The maximum rated working pressure of an item at a specified temperature range.AXFB
Maximum Working Pressure Rating At Specificationified Tempurature Range:
3000psi at minus 65 degrees f to plus 250 degrees f
MRC:
The design of the connection.AXFC
Connection Design:
Threaded and threaded and threaded
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.880 inches
MRC:
Indicates the displacement type.AXFP
Displacement Type:
Variable
MRC:
The government specification and/or standard that specifically covers the connection.AZFE
Connection Government Specification/std:
Ms33649-6 and ms33649-3
MRC:
The spacing in the arrangement of the mounting bolt holes.AZFG
Mounting Bolt Hole Spacing:
1.876 in. By 1.876 in.
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.AZFH
Housing Surface Treatment:
Enameled
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Mount machine gun
