رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Axial hole 1/8-27npt x 3.000 deepfrom head; point is 1.375-18unef-3a
TXT
وصف:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Counterbored w/o through hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Dee
Distance From Centerline To Flat:
0.880 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
1.375 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
4.120 inches
Undercut Diameter:
1.250 inches
Under Head Length:
4.920 inches
Undercut Width:
0.120 inches
Second Undercut Width:
0.120 inches
Second Undercut Diameter:
1.440 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
0.124 inches
Second Hole Diameter:
0.124 inches
Distance From Centerline Of Hole To End Of Pin:
2.120 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
0.380 inches
First End Counterbore Diameter:
0.880 inches
First End Counterbore Depth:
0.120 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Casehardened
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
25.0 rockwell c and 35.0 rockwell c
Pin Head Diameter:
2.550 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches long shank
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.380 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 8620
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-13048 military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Lubricant
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-l-8937 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
