رقم الجزء 11672477

Headed Grooved Pin
وصف

Pin, grooved, headed

الأسعار والتوافر

أرسل هذا النموذج لمعرفة الأسعار الحالية وتوافر NSN هذا.
رقم الجزء:
كم:
عنوان البريد الإلكتروني:
الهاتف:
مرجع:
شركة:
اسم:

نحن لا نشارك أو نبيع معلوماتك لأي شخص.
الخصوصيه | حيث

All major credit cards accepted as well as gov. p-cards

التسعير التاريخي لهذا المنتج هو بين 8.74 and 11.799 USD. اعتمادا على الكمية والتوافر والحالة والمهلة الزمنية والتوقف المحتمل للعنصر ، لا يمكننا ضمان التسعير حتى نقدم لك عرض أسعار محدث.

رقم الجزء
تجريد
صلاحيه
UOM
NIIN
رقم الجزء:
11672477
تجريد:
No
صلاحيه:
N/A
وحدة القياس:
1 EA
NIIN:
011615403

معلومات الجزء
Head to body radius is 0.30 in max, chamfer finish 63 microinches, groove0.097 in from small end has sharp corners on both walls

NSN
رقم المخزون الوطني:
5315-01-161-5403 5315011615403
TXT
وصف:
Headed Grooved Pin
INC
INC
رمز اسم العنصر:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.186 inches and 0.187 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
0.473 inches
MRC:
None.ABPA
Undercut Diameter:
Between 0.174 inches and 0.176 inches
MRC:
None.ABPB
Under Head Length:
0.580 inches
MRC:
None.ABPC
Undercut Width:
Between 0.018 inches and 0.200 inches
MRC:
None.AMCS
First End Taper Length:
0.030 inches
MRC:
None.CRMG
First End Taper Angle:
45.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
0.310 inches
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.090 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 or steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

{lang[cimilar]} Headed Grooved Pins

« Nails, Machine Keys and Pins {lang[catalog]}
قارن الآن»
واضح | أخفى