رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Exterior bleached white; hand holes; printed instructions for retiring records to national archives; style, locked bottom
MRC:
Indicates the designed use of the item.ACVE
Usage Design:
Domestic
MRC:
An inside measurement taken at right angles to the length of an item,in distinction from thickness.ADJT
Inside Width:
11.750 inches
MRC:
A measurement of the longest inside dimension of an item,in distinction from width.ADJU
Inside Length:
14.750 inches
MRC:
An inside measurement between specified points of an item,in distinction from height.AFEF
Inside Depth:
11.750 inches
MRC:
The minimum force required to rupture the material,expressed in specified units of measure per unit of area.AFPH
Material Bursting Strength:
275.0 pounds per square inch
MRC:
The form of assembly in which the item is supplied,whether completely assembled or specifying a degree of assembly which inherently describes the presence of a space saving feature.AFPM
Assembly Form:
Folded
MRC:
The means by which the body parts are designed to be fastened together.AFPN
Assembly Method:
Stapled
MRC:
The means provided to close the opening of the item.AFPP
Closure Method:
Flaps
MRC:
Indicates the type of device(s) used to secure the closure of the item.AFPQ
Closure Fastening Type:
Any acceptable
MRC:
An indication of whether or not a design feature is provided for controlling the humidity within the item.AFPX
Humidity Control Design Feature:
No
MRC:
A measurement of the internal capacity of an item taken by multiplying the length by the width by the depth and rendered in cubic units.AFPY
Cubic Capacity:
1.4 cubic feet
MRC:
A designation of the most difficult type of load for which a container is designed with respect to the hazards imposed by the actions of internal and external forces.AFPZ
Container Load Hazard Designation:
Not rated
MRC:
An indication of whether or not a design feature is employed that provides for safe and level stacking of one item upon another.AFQA
Stacking Feature:
No
MRC:
The certificate required on fiberboard shipping containers showing the name and address of the manufacturer,together with certification data that the container has been manufactured and tested in accordance with the regulations of the common carrier that governs the shipment.AFQG
Box Manufacturer Certificate:
Required
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Fiberboard, astm-d-5118 and astm-d-4727
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Fiberboard, astm-d-5118 and astm-d-4727
