رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Plus and minus symbols replaced with l and r
TXT
وصف:
Rotating Counter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.755 inches and 2.775 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
Between 1.097 inches and 1.098 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.218 inches
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
Between 0.155 inches and 0.156 inches
MRC:
A measurement of the longest dimension of the shaft,in distinction from width.ABXF
Shaft Length:
Between 0.370 inches and 0.390 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
0.1875 inches
MRC:
The number of register(s) contained in the item.ANQD
Register Quantity:
4
MRC:
The number of digits displayed on each register of the item.ANQS
Figure Quantity Per Register:
10 single register single tier
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
0.187 inches single register single tier
MRC:
The number of shaft revolutions required to make one count.ANRD
Shaft Revolutions Per Count:
0.01 single register single tier
MRC:
The maximum number of counts the item can accomplish in a measured time.ANRE
Maximum Count Rate:
10.0 per second single register single tier
MRC:
The means used to return the register/s/ to original position.AXEC
Register Reset Method:
Individual figure manual single register single tier
MRC:
The mathematical function the register/s/ is designed to perform.AXED
Register Function:
Add single register single tier
MRC:
Indicates the location of the actuating device on the item.AXEG
Actuating Device Location:
Left side single register single tier
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
4 unthreaded hole
MRC:
Indicates the type of mounting for which the item is designed.BCNX
Mounting Type For Which Designed:
Shaft single register single tier
MRC:
The means by which the display of the numeral is provided.CSWS
Numeral Display Method:
Wheel
MRC:
The readout of the numerals displayed by the item.CSWT
Numeral Readout:
00000 single register single tier and 99999 single register single tier
MRC:
The direction the shaft turns as viewed from the drive end and the maximum speed,expressed in revolutions per minute.CSWW
Shaft Rotation Direction And Maximum Speed In Rpm:
2400.0 clockwise single register single tier
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical cased
