رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Optical Element Retainer
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.710 inches and 0.720 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.065 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.100 inches and 0.110 inches
MRC:
The number of holes or slots included.ABKT
Hole Or Slot Quantity:
1
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Any acceptable
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
Any acceptable
MRC:
Designates the thread diameter and number of threads per specific measurement scale.ABUJ
Thread Size:
0.9375 in.-32
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
0.045 inches
MRC:
Indicates the type of drive for turning,rotating,or positioning the mechanism.AKCV
Drive Type:
Slotted
MRC:
The design of the guide on the item.BMTQ
Guide Design:
Thread chamfer
MRC:
Indicates the location of the guide on the item.BMTR
Guide Location:
Both edges
MRC:
An indication of whether or not an internal annular serration(s) is provided.BMTS
Internal Annular Serration:
Not provided
MRC:
An indication of whether or not a setscrew notch is provided.BMTT
Setscrew Notch:
Not provided
Hole Chamfer Angle In Deg:
45.0
Hole Chamfer Diameter:
Any acceptable
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum alloy 2024 or 6061, temper t3 through t6, spec ww-t-700/3, ww-t-700/6 or qq-a-200/3, qq-a-200/8 or qq-a-225/6
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024 or 6061, temper t3 through t6, spec ww-t-700/3, ww-t-700/6 or qq-a-200/3, qq-a-200/8 or qq-a-225/6
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Recessed
