رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Nonmetallic Channel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Open channel with round base
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
45.0 shore durometer a and 55.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
700 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees celsius and 205.0 degrees celsius
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.510 inches
Left Side Flange Height:
0.400 inches
Right Side Flange Height:
0.400 inches
Left Side Flange Thickness:
0.060 inches
Right Side Flange Thickness:
0.060 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Crack and oil resistant and tear and low temperature and heat dry and high temperature
Inside Radius:
0.050 inches
First Slot/groove Depth:
0.450 inches
MRC:
A measurement of a straight line drawn from the center of a circle to any part of its circumference.AJGW
Outside Radius:
0.110 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the right-side flange tip.CZLZ
Right-side Flange Tip Style:
Right square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 3302 national specification single material response
