رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
45 degree chamfer 0.230 in min, 0.290 in maximum deep on second leg end
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 0.970 inches and 1.030 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 1.030 inches and 1.090 inches
Second Leg Width:
Between 0.860 inches and 0.900 inches
First Leg Hole Diameter:
Between 0.410 inches and 0.430 inches
Second Leg Hole Diameter:
Between 0.600 inches and 0.640 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.420 inches and 0.460 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.410 inches and 0.450 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
0.063 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
0.063 inches
First Leg Width:
Between 0.860 inches and 0.900 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.420 inches and 0.460 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.370 inches and 0.410 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
First Leg Angle:
60.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
