رقم الجزء
تجريد
صلاحيه
UOM
NIIN
TXT
وصف:
Shouldered Shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Circular grooved
First End Groove Width:
0.3200 inches
First End Groove Diameter:
0.4000 inches
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two cross drilled holes
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
2.600 inches
First End Distance From End To Groove:
0.1400 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.9993 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.7495 inches
MRC:
The length of a straight line which passes through the center of a hole or body of the second end,and terminates at the circumference.AMGS
Second End Hole Diameter:
Between 0.1900 inches and 0.1960 inches
Second End Distance From Hole Center To End:
0.5000 inches
MRC:
A measurement between specified points of the hole at the second end,in distinction from height.AMHD
Second End Hole Depth:
0.7495 inches
Second End Distance Between Hole Centers:
0.5000 inches
Second End Angle Between Holes:
90.0 degrees
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
1.125 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5737 assn standard single material response
