رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Static balanced to 0.500 in. Oz. By drilling/grinding
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.948 inches
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
1.094 inches and 1.128 inches
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.406 inches and 0.220 inches
MRC:
A measurement between specified points of a groove,in distinction from height.ABGA
Groove Depth:
Between 0.815 inches and 0.949 inches
MRC:
A measurement taken at right angles to the length of a groove,in distinction from thickness.ABGF
Groove Width:
0.438 inches
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
7.560 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.894 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
14
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.ABSC
Spline Minor Diameter:
Between 0.815 inches and 0.820 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
2350-00-078-4545 carrier, cargo, ft, m548
MRC:
The angle of the v groove,expressed in degrees.AGGS
V Groove Angle In Deg:
36.0
MRC:
A measurement indicating the diameter-pitch per specific measurement scale of the item.AGJS
Pitch Diameter:
6.090 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.ANNQ
Material And Location:
Steel, astm a148
MRC:
A measurement taken at right angles to the length of the face,in distinction from thickness.AQPL
Face Width:
1.560 inches
MRC:
The physical configuration of the item.ARJD
Design Form:
Webbed
MRC:
Indicates the type of bore used on the item.ASBP
Bore Type:
Involute spline
MRC:
An indication of whether or not bearings are included.AWJQ
Bearings:
Not included
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.0
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.000 inches
MRC:
The number of grooves provided.AXHQ
Groove Quantity:
2
MRC:
An indication of whether or not a counterbore feature is included.AXND
Counterbore Feature:
Included
MRC:
A measurement of the spline pitch diameter.BDTX
Spline Pitch Diameter:
0.8750 inches
MRC:
Indicates the location of the counterbore on the item.BDYS
Counterbore Location:
Both ends
MRC:
An indication of whether or not a split hub feature is included.BSYG
Split Hub Feature:
Not included
MRC:
An indication of the relationship between the webbing or spokes and the centerline of the face.BXSH
Web/spoke Relationship To Face Centerline:
Not offset
MRC:
An indication of whether or not a lightening hole/s/ is included.BXSJ
Lightening Hole:
Not included
MRC:
An indication of whether or not an integral cooling vane(s) is included.BXSK
Integral Cooling Vane:
Not included
MRC:
The physical configuration of the groove.BXSM
Groove Shape:
V
MRC:
An indication of whether or not a bore feature is included.BYDS
Bore Feature:
Included
MRC:
An indication of the characteristic of the protruding hub.BYDZ
Protruding Hub Characteristic:
Grooved
MRC:
Indicates the location for securing the item.BYFF
Securing Location:
Aa end
Hub End Outside Diameter And Location:
1.377 inches aa end and 1.378 inches aa end
Distance From Outside Flange/rim To Hub End And Location:
3.334 inches aa end
MRC:
The diameter and location of the first end groove.BYZR
First End Groove Diameter And Location:
1.287 inches aa end and 1.295 inches aa end
MRC:
The width and location of the first end groove.BYZS
First End Groove Width And Location:
0.056 inches aa end and 0.060 inches aa end
MRC:
The length from the grove to the end and its location on the first end.BYZT
First End Length From Groove To End And Location:
0.109 inches aa end and 0.141 inches aa end
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Enamel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Webbed or spoked
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Enameled
