رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Item has four places extending from the bottom which are 0.500 in. Deep which gives an actual hg.Of 1.060 in.
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat, round rib reinforced
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
7.935 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
Between 0.350 inches and 0.410 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, rounded corners, four ears an d holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 13.470 inches and 13.530 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
Between 0.350 inches and 0.410 inches
Distance Between Holes Along Length:
4.250 inches
Distance Between Holes Along Width:
7.625 inches
Distance From First Hole Centerline To End Along Length:
4.625 inches
Distance From First Hole Centerline To End Along Width:
0.780 inches
Inverted Radius:
Between 0.350 inches and 0.410 inches
Ear Radius:
Between 0.280 inches and 0.340 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.530 inches and 0.590 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 356.0
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-601, t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize and paint
