رقم الجزء
تجريد
صلاحيه
UOM
NIIN
معلومات الجزء
Includes: 1 ea marker, cage 19207, p/n 12309214; 1 ea marker, cage 19207, p/n 12309216; two of the beveled courers are 0.19 inches by 45 degrees. Holes are 0.50 inches wide and 0.75 inches long
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 7.820 inches and 7.940 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 14.560 inches and 14.680 inches
Distance Between Holes Along Length:
Between 10.485 inches and 10.515 inches
Distance Between Holes Along Width:
6.690 inches
Distance From First Hole Centerline To End Along Length:
Between 1.985 inches and 2.015 inches
Distance From First Hole Centerline To End Along Width:
0.595 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
Between 0.540 inches and 0.660 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.250 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5083 or aluminum alloy 5086
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
-h321, qq-a-250/6 federal specification 1st material response and -h32, qq-a-250/7 federal specification 2nd material response
